• Optical filters

    Optical filters

    See the essential - suppress interference

Use of filters

One inexpensive means to optimise the image information is the use of optic filters. The basic idea in most cases is to enhance the contrast in the resulting image.

This can, for instance, be achieved by suppressing interfering wavelength ranges in the light spectrum in order that coloured features can be lightened up or darkened when using coloured lighting. Interfering effects of extraneous light can be avoided or the wavelengths of the light used can simply be limited to the extent that the camera sensor works at its optimum.

With the exception of light control films, they are usually mounted to the filter thread of the lens. If this is not available, special plug-on mounts are possible, too, e.g. for telecentric lenses. In case of some industrial cameras it can also be mounted between lens and sensor. The advantage is that the filter may then be rather small and thus cheaper than a very large filter in front of an objective with large front lens. However, this shall already be provided by the camera manufacturer. A provided clear glass filter / IR cut filter can be replaced by a special type.

Common filter types are:



Partner & Network

European Imaging Academy
UKIVA
SpectroNet
Inspect
Machine Vision 4 Users